This is the higest energy density commercially avaliable drone battery on the market today!
Buy now and ships within 2 business days!
 
How to use:
These new Silicon anode based batteries can be charged just like a LiPo or LiIon, to 4.2V/cell. However, due to the lower nominal voltage, the pack voltage will drop down to a lower voltage than a standard LiIon or LiPo chemistry. We recommend landing at 2.7V per cell, or 16.2V for this pack.
 
Integration Notes:
Battery should have access to constant airflow during use and during charging. Charge and discharge power and current rating is limited by the amount of airflow over the battery during flight. Cell skin temperature must remain below 70C during use
 
Electrical Specifications:
Nominal Voltage: 20.4V
Capacity: 43200mAh
Watt Hours: 881.28Wh
Constant Discharge Power: 2500W Airflow Limited
Constant Discharge Current: 120A Airflow Limited
Burst Current: 200A for 10 seconds Airflow Limited
 
Charge Rate:
35A Nominal 70A Airflow Limited
 
Voltage Parameters:
Max voltage: 25.2V pack, 4.2V per cell
Min voltage: 15.3V pack, 2.55V per cell
Storage voltage: 20.4V pack, 3.4V per cell
Landing voltage: 16.5V pack, 2.75V per cell
 
Mechanical Specifications:
Cell: Amprius SA08
Configuration: 6s4p
 
Energy Density Specs:
Weight: (±2g) 2720g
Cell Energy Density: 360Wh/kg
Pack Energy Density: 324Wh/kg
Pack Power Density: 919W/kg
Pack Volume: 1260cm^3
Pack Volumetric Density: 0.699Wh/cm^3
 
Connectors:
Balance Plug: JST-XH-7P, 22AWG
Discharge Plug:  XT90, or AS150U 10 or 8 AWG cable
 
Dimensions: 14 x 10 x 9 cm, 100% SoC
 
Maximum Cell Temperature Range
-20C/0F - 70C/165F