New! Molicel P30b cell option! See "datasheets" page for more information on this cell
 
Integration Notes:
Battery should have access to constant airflow during use and during charging. Charge and discharge power and current rating is limited by the amount of airflow over the battery during flight. Cell skin temperature must remain below 70C during use
 
Electrical Specifications:
Capacity: 5600mAh
Watt Hours: 83Wh
Discharge Power: 520W, Airflow Determined
Discharge Current: 40A, Airflow Determined
Burst Current: 80A for 10 seconds, Airflow Determined
 
Charge Rate: 6A Normal, 9A Rapid, Airflow Determined
 
Voltage Parameters:
Max voltage: 16.8V pack, 4.2V per cell
Min voltage: 10.2V pack, 2.55V per cell
Storage voltage: 14V pack, 3.5V per cell
Landing voltage: 11V pack, 2.75V per cell
 
Mechanical Specifications:
Cell: Molicel P28A
Configuration: 4S2P
 
Energy Density Specs:
Weight(±2g): 386g
Cell Energy Density: 222Wh/kg
Pack Energy Density: 215Wh/kg
Pack Power Density: 1.35kW/kg
 
Connectors:
Balance Plug: JST-XH-5P
Discharge Plug: XT60 or XT90
 
Dimensions: 14.4cm x 3.8cm x 3.8cm (L x W x H)
 
Maximum Cell Temperature Range:
-17C/0F - 80C/175F