New! Molicel P50b cell option! See "datasheets" page for more information on this cell
 
Integration Notes:
Battery should have access to constant airflow during use and during charging. Charge and discharge power and current rating is determined by the amount of airflow over the battery during flight. Cell skin temperature must remain below 80C during use
 
Electrical Specifications:
Capacity: 10000mAh
Watt Hours: 432Wh
Cell Energy Density: 255Wh/kg
Pack Energy Density: 242Wh/kg
Pack Power Density: 1.12kW/kg
Discharge Power: 2000W, Airflow Determined
Discharge Current: 100A, Airflow Determined
Burst Current: 150A for 10 seconds, Airflow Determined
Charge Rate: Normal: 10A, Rapid 20A, Airflow Determined
 
Voltage Parameters:
Max voltage: 50.4V pack, 4.2V per cell
Min voltage: 31.2V pack, 2.6V per cell
Storage voltage: 42V pack, 3.5V per cell
Landing voltage: 33.6V pack, 2.8V per cell
 
Mechanical Specifications:
Cell: Molicel P50B
Configuration: 12S2P
Weight(±6g): 1785g
 
Connectors:
Balance Plug: JST-XH-13P
Discharge Plug: XT60 or XT90
 
Dimensions: 6.5cm x 8.7cm x 15.5cm (H x W x L)
 
Maximum Cell Temperature Range:
-17C/0F - 80C/175F